Wet & Forget Mould + Mildew Remover

Keep those paths mould FREE

With “Wet and Forget”



The new Wet and Forget Hose End makes outdoor cleaning quick and easy. The much-awaited hose end was designed with a proprietary nozzle for higher reach and more coverage per bottle. Bleach Free Moss, Mould, Lichen & Algae Remover.

You can now reach 8 metres (that's 2 storeys) without using a ladder!

Treat an entire house, roof, driveway, or deck in minutes!
Simply spray it on and forget it!
Wet +ForgetRapidLogo1

Rapid Application has a unique combination of biodegradable selective fungicides to target moss, mould, lichen, algae, and general biological growth. Like the original Wet & Forget concentrate, Rapid Application kills
the spores.

The weathering process gently removes the decomposing growth over time without damaging
the surface it has infested.

Wet & Forget is safe to apply to any exterior surface. Just spray and leave.
This can be sandstone, bricks, pavers or tiles.
Just spray and leave, and then over time the surface will come clean.

Haymes Simply Woodcare Dexpress

For a long lasting finish that presents your decking, weatherboards, screening and garden furniture in their best light, choose Simply Woodcare's Dexpress Deck and Timber Stain. It has a sheen level of between 5 and 15%. It is abrasion resistant.
Dexpress is formulated with Hybrid Polymer technology. It enhances the look and longevity of your timber. This product is a water based finish and won’t crack or peel.


Dexpress will enhance the look and longevity of Australia's favourite decking timbers including Merbau, Spotted Gum and Treated Pine, it's tested and proven to withstand the harsh Australian climate. It is UV & mould resistant and quick drying.
It is best applied with a brush, mohair applicator, mohair roller, lambswool applicator. It is touch dry in 20 minutes. It is water wash-up and can be recoated in 2 hours. Thinning is not recommended.
Under normal conditions Dexpress will cover up to 12 square meters per litre. It is available in 1lt - 4lt and 10lt quantities.
Dexpress Merbau stain is usually the most preferred one for Merbau timber as it has a darker pigment. The darker pigment is one of the best and most budget friendly ways to achieve a uniform look on your deck as it easily hides imperfections.
DO NOT apply if rain is expected within 24 hours of application. Should rain or dew come into contact with the freshly applied finish white marks can appear. Pooled water should be removed using a soft mop.

For more information visit the Haymes product page at:

NuTech Agreseal - Concrete Sealer

Wet look sealer for aggregate
and concrete surfaces
Hardwearing clear sealer that provides
a wet look finish for exposed aggregate

Agreseal™ concrete sealer utilises advanced technology developed by Nutech over nearly 40 years. Agreseal™ is a ready to use clear glaze specifically formulated to seal and protect decorative exposed aggregate concrete surfaces and to improve concrete surface performance and appearance. Agreseal™ provides an attractive finish for new and old exposed aggregate surfaces. It also provides excellent protection against fading and powdering of oxide colours, staining and marking due to contaminants including foodstuffs, oil and grease.
Agreseal is a deep penetrating, solvent-based acrylic sealer that provides a glossy wet look to the aggregate. Agreseal is recommended as a two-coat system which will provide a durable surface, ideal for pedestrian and light vehicle traffic.
Agreseal repels water and enhances aggregate and concrete colour, whilst protecting the surface against most stains such as grease and oil.

Agreseal™ can also be used as a decorative and protective coating system on a wide range of concrete paving and building applications excluding clay and terra cotta bricks and tiles.Agreseal

It is applied at a rate of two coats @ 3-5 square metres per litre per coat.

Norglass Liquid Glass

Make a Decorative River Table
With Norglass Liquid Glass

Have you ever pictured a gorgeous river wood table in your living room? What a great attention getting one would make. Whilst this is a multi-day process at the end of the day the result will be a high gloss and UV resistant custom table - well worth the time and effort to make yourself a masterpiece that everyone will admire.


It all starts with a piece of reclaimed timber such as cedar or whatever else takes your fantasy and is a suitable length. Cut the time in half lengthways to create two pieces which are an even thickness. Use a belt sander to clear all dirt and imperfections such as bark from both pieces.
On a suitable flat surface build a container, or mold, to house the tabletop while the liquid resin dries. Start by cutting a piece of melamine to the desired dimensions of the table top. Using additional pieces of melamine, cut walls for the mold which will be tall enough to house the panels of reclaimed cedar, and any minor overflow of resin.
Place the two pieces of timber into the mould with the straight edges to the outside, leaving a gap in the middle of the pieces to make the river of epoxy.
To prepare and pour Norglass Liquid Glass sit with a coffee and have a good look at the detailed video mentioned below. Even watching a couple of sessions of the video whilst having a cup of coffee will make the job easier.

You can watch a detailed video of just how to complete this project on this link:

Just think about the pleasure this project will give you. Norglass Liquid Glass is available from Maleny Paint Supplies.

A Bit about Paints

A coat of paint can really transform the look of any room, floor, doors or deck, and it doest cost you a small fortune to get a new look from some ageing items in your home. But when you see paint on the market ranging from $8 a litre all the way to $20 or more, it starts to raise questions. Are those more expensive paints REALLY worth the money?

One factor that you need to consider, is the type of paint. Oil based paint or water based latex. Oil paints are great for durability and provide a really smooth coat. But they are also a lot harder to clean up. water based latex on the other hand has come a long way with the improved chemistry behind them, and can be cleaned with water. 

Another deciding factor in the higher grade, higher priced paints, is application. The higher grade paints contain a titanium in the mix, which gives the paint more coverage and a smoother finish. So it does a better job at covering up those small imperfections that come with time. With a lower grade paint, you may need 3-4 and sometimes even 5 coats to get the same effect as you would with the more expensive paint. 

When applied by paintbrush, cheaper paints show brush marks and provide poor coverage due to the thin layers they create. Higher-quality paints provide smooth, one-coat coverage. This will save you a lot of time, and also mean less usage. You may only need 4 litres of a high quality paint, as compared to 12-16 litres of the lower grade to cover the same area with multiple coats. 

Another big difference is in durability. The more expensive paints are also more washable and offer greater scrub resistance. If you try washing dirt off a cheaper paint, you're likely to wash off some of the paint itself. And no one wants to see that 1970’s green showing up on your newly refreshed wall do they? When choosing paint colours, pick a paint chip that appeals to you, and match it to the store's fan deck; the colours are listed alphabetically and numerically. Next, check the light reflective value (LRV) of the paint. This is a scientific measurement of how dark or light the paint will be once it's on your walls.
As a general rule, interior paints should have an LRV of 50 percent or more. Keep in mind that the colour will appear more vibrant when you apply it to the walls.

Nu Tech Roof Coatings

NXT Cool Zone
Environmentally Responsible Roof Coating
NXT Cool Zone is an advanced development of Nutech Paint’s 45+ years’ experience in developing and manufacturing coating technology that sets new standards in roof coating performance. NXT Cool Zone is an innovative, nanotechnology modified acrylic polymer coating designed to substantially lower surface friction to significantly reduce dirt retention and ultimately, aide in the self-cleaning ability of the coating. What’s more, NXT Cool Zone utilises the latest exterior grade ultra high durability fade resistant and infrared reflective pigments which are highly resistant to chemicals, UV light and heat. NXT Cool Zone offers outstanding long-term exterior durability which will stay cleaner and retain colour and gloss longer than any conventional acrylic roof coating on the market. NXT Cool Zone is available in High Gloss or Low Sheen finishes in 46 standard shades.

Preparation is KEY

A successful paint job starts with properly preparing the surface you're going to paint. That means you must scrape, sand, patch, and fill every hole, crack, dent, and surface imperfection.

This isn't the fun part of painting a room, but it is the most important part. No paint, regardless of its cost, colour, thickness, or manufacturer's claims, will hide a pockmarked or cracked surface.

If the preparation is done correctly then the painting is easier and a good look is ensured.